ELECTRONICS
Ease of use. Reliability. Precision.
DOSICONTROL+
• Computer with microprocessor with alphanumeric LCD
​
• Sensor on the pulley to measure turbine rotation
​
• Sensor on the cage to measure the length of the roller to be wound or unwound and the running speed
​
• End-of-stroke sensor fixed on the stop rod to check the stop valve and turn off the turbine
​
• Electronic actuator to open the bypass valve
​
• 12V 40a/h battery
​
• 5W solar panel
DOSICONTROL PRO
• Computer with microprocessor with alphanumeric LCD
​
• Sensor on the pulley to measure turbine rotation
​
• Sensor on the cage to measure the length of the roller to be wound or unwound and the running speed
​
• End-of-stroke sensor fixed on the stop rod to check the stop valve and turn off the turbine
​
• Electronic actuator to open the bypass valve
​
• 12V 40a/h battery
​
• 5W solar panel
​
• Integrated GSM kit for remote communication (remote updating, sending and receiving SMS)
​
• USB port for updates
Functions
Dosicontrol Pro and Dosicontrol+ offer 3 programming modes and the ability to program up to 8 irrigation zones:
​
• Programming of the travel speed
• Programming of rainfall
• Programming of the arrival time
​
​
Information shown on the display:
​
• Countdown start timing
• Countdown arrival timing
• Winding speed in m/h
• Arrival time
• Flow rate in m3/h
• Distance in m
• Rainfall in mm
• Actual date and time
• Delayed start
• Line with all functions
• Actual speed and status of the 3 sensors
• Program Version - Sprinkler Base - Turbine Type
• Manual / Automatic: allows manual control of the actuator
• Self-diagnosis of components
• Total working hours
• Measurement of unwinding length
Top Rain
Top Rain is designed to adjust and change the sprinkler angle of rotation. This equipment is completely autonomous, as it is equipped with a solar panel and a battery.
Programming the irrigation angle at the start
Reverse start
Obstacle avoidance
Reduced spacing
Regular irrigation line
INFORMATION
Top Rain allows you to irrigate in particular cases to avoid an obstacle, a road, to perform a reduced spacing or even a regular line, to make a reverse start or to set a particular sector angle at the beginning and end of the irrigation.
This device adapts very easily to all major brands of sprinklers and can be easily installed on most trolleys.
FUNCTIONALITY
An electronic device allows you to know the position of the trolley and to program the desired angle and range.
Once programmed, the model is stored (up to 1000) to be reused indefinitely. This system is suitable for all types of sprinkler with reversing lever.